Start-up
Page GB-35
(54)
1. Determine the mounting height for the
water filter (41).
The white appliance hose (54) must be
able to reach the water filter.
If the white appliance hose is too short, it
may be extended using the blue extension
hose (55) (see "14.9 cm“ on page GB-35).
2. Highlight the two points on the wall that
have already been determined as the
correct mounting height. The distance
between the points should be 14.9 cm. To
do so, please use a folding rule, a pencil
and a spirit level.
3. Use a metal detector to check the drill ar-
eas. If necessary, select another location
for assembly.
4. Drill a dowel hole approx. 25mm deep in
each marked positions using a masonry
drill.
5. Insert the dowels (48) fully into the holes.
(47)
(47)
(46)
(46)
14.9 cm
6. Screw the wall brackets (46) tightly onto
the wall with the screws (47). Use the
cross-headed screwdriver.
The screws sink into the wall brackets.
(41)
(50)
(50)
7. Remove both caps (50) from the water
filter.
(54)
8. Press the water filter into the wall bracket
so that the arrow located on the water
filter points in the direction of the white
hose (54).
Connect the water filter
To connect water filter (41) you will need
these parts:
(40)
2x hose connector
(49)
2x safety clips
(52)
1 x inlet hose
(41)
(40)
(40)
1. Insert the hose connectors (40) into the
water filter (41) and press firmly.
Summary of Contents for HSBS17990WEA1S
Page 50: ......
