Remove chilled water and ice
Page GB-25
Remove the ice cubes
To remove the ice cubes, use a container with
an opening of at least 7 cm, in order to pre-
vent ice from escaping around the sides.
When switching the appliance from the
dispensing of crushed ice to “ice
cubes”, it can sometimes occur that
residual crushed ice can also escape
with the ice cubes.
QUICK FRZ
QUICK REF
FILTER RESET /3S
HOLD 3S UNLOCK
(24)
(26)
1. Press the (24) DISPENSER selection but-
ton as often as required until the (26)
symbol appears on the display.
HOLD 3S UNLOCK
(33)
(34)
2. Hold the container as close as possible
to the opening of the ice dispenser (34) to
prevent ice cubes from escaping.
3. Push the container against the dispenser
pad (33). Ice cubes will begin to fall into
the container.
4. Remove the container from the dispenser
pad to terminate the ice dispensing.
Locking/unlocking the ice
maker
Locking
If you will not be using the chilled water and
ice dispenser for a longer period of time, you
can lock the ice maker:
QUICK FRZ
QUICK REF
FILTER RESET /3S
MODE
(27)
(29)
1. Unlock the control panel if necessary by
pressing the (21) LOCK/UNLOCK button.
2. Press the button (29) ICE OFF. The (27)
symbol lights up on the display.
(32)
(2)
3. Close the ice dispenser (2) with the lock-
ing box (32) to save energy.
Unlocking
1. Remove the locking box (32) and close
the door to the freezer compartment.
2. Unlock the control panel by pressing
the (21) LOCK/UNLOCK button.
3. Press the button (29) ICE OFF.
Summary of Contents for HSBS17990WEA1S
Page 50: ......
