Setting up and aligning the
appliance
1. Place the appliance on as flat and as
firm a base as possible. Observe the
minimum distances to the sides, back
and top “Choosing a suitable location” on
page EN-20).
2. Check the position with a spirit level.
3. Level out any unevenness on the ground
using both of the front screw feet.
– Close the door.
– Tilt the appliance backwards slightly and
screw in/unscrew the screw feet (6).
– Stand the appliance back up again and
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the door.
Installing the door handle
NOTICE
Risk of damage!
The paint on the housing is delicate.
■
Make sure that the paint surface is
not scratched when fi tting the door
handle.
2
(b)
1. Unscrew the countersunk screws (b) from
the door and put them safely to one side.
(c)
2. Screw the fixing screws (c) into the holes
provided in the door.
(a)
(c)
3. Place the door handle (a) on the fixing
screws (c).
Start-up
Page EN-23
