Changing the door hinges
Page EN-20
Changing the door hinges
You can change the side on which the door
opens. The door hinges are on the right upon
delivery.
As this alteration requires some manual skills,
please read through the work instructions be-
fore altering.
In addition to the package contents, you will
require:
– a medium sized cross-slotted screwdriver,
– a fine flat-headed screwdriver,
– a 10 mm wrench or combination wrench,
– the assistance of another person, where
possible.
(15)
(18)
(17)
(16)
(19)
1. Ensure that the appliance is not connect-
ed to the power supply.
2. Using a flat-head screwdriver, carefully
pry out the blind covers (15) and (18) on
the top of the appliance and the blind
plugs (17) on the door frame.
3. Loosen the three screws (16) on the up-
per hinge (19), and remove these. As a
precaution hold the door itself with one
hand, or please ask a second person to
hold the door.
4. Remove the upper hinge (19).
5. Lift the door from the lower hinge, and set
aside.
6. Tilt the appliance backwards slightly, and
rest it against a wall.
(3)
7. Unscrew both feet (3).
( )
(20)
(21)
8. Loosen both screws (20) on the lower
hinge (21) and remove.
g ( )
(23)
(22)
(24)
9. With the wrench, loosen the nuts (23),
and remove the pin screw (22). In do-
ing so, ensure you do not lose the snap
ring (24).
g ( )
(25)
10. Remove the tapping screw (25), and
screw it back in on the opposite side.
Summary of Contents for HMKS5144FW
Page 28: ...Technische Daten Seite DE 28...
