Hanseatic HMKS5144FW, User Manual

Page: 38 / 54

Operation Page EN-10
Before getting started
• Read the ‘Safety’ chapter and in particular
the safety instructions (see "Safety" on
page EN-5).
• Set up and connect the appliance as
described in the ‘Start-up’ chapter (see
page EN-16).
Switching on and off
1
0
5
4
2
1
0
5
4
3
2
(12)
3 3
The temperature controller (12) can be used
to switch the appliance on and off. The tem-
perature controller is located bottom left at
the rear of the fridge. It is variably adjustable.
1
0
5
4
3
2
Tip: Insert a coin into the temperature control-
ler to adjust it.
Operation
Switching on
1. Set the temperature controller to a level
between “1” and “5”.
The appliance is switched on, the motor
starts to work. The refrigerant flows through
the pipes and a quiet humming sound can
be heard.
2. If the appliance makes worrying noises,
check its stability and remove any objects
on top of the appliance.
Switching off
1. Set the temperature controller to ‘0’.
2. Empty the appliance.
3. Clean it (see Chapter "Care and mainte-
nance“ on page EN-14).
4. Leave the door open slightly to avoid
mould formation.
5. Pull the mains plug out of the socket if
you are not using the appliance for a pro-
longed period.
Temperature controller
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Always ensure the prescribed ambi-
ent temperature is maintained (see
"Intended use" on page EN-5).
Adjust the refrigeration temperature using the
temperature controller (12). The cooling pow-
er is variably adjustable from ‘0’ to ‘5’. ‘5’ is
the lowest temperature.
The ideal fridge temperature is +6 °C.