Start-up
Page EN-17
13. Screw the hinge plate to the oppo-
site side. Use a size 8 spanner or a
cross-headed screwdriver.
14. Rescrew the screw-on foot tightly onto
the refrigerator.
15. Insert the refrigerator door into the lower
hinge plate.
16. Carefully stand the refrigerator upright.
17. Tighten the upper hinge plate on the
opposite side.
18. Reinstall the covers.
19. Align the refrigerator with a spirit level.
20. Check whether the door seal sits se-
curely in place (see Section „Care and
maintenance“ on page EN-12).
You have successfully changed the direction
the door opens to.
Cleaning before use
To remove the odour that comes with all new
appliances, clean the appliance before using
it for the first time (see Section „Cleaning the
fridge compartment“ on page EN-13).
Connecting the appliance
CAUTION
Risk of damage to property!
The coolant must be allowed to settle be-
fore connecting.
■
After transport leave the appliance to
stand for 2 hours.
■
If your appliance has been transported
horizontally for an extended period of
time, lubricant from the compressor may
have got into the fridge. Leave the appli-
ance for 12 hours in an upright position.
• Connect the mains plug to a properly in-
stalled socket (220-240 V~ / 50 Hz / 10 A).
