Page EN-28
Installation and connection
Choose a suitable location
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The appliance must be positioned beneath
a full worktop which is joined together with
the cupboards adjacent to the appliance.
– In order to install the connection pipes, the
appliance must be positioned near to a
washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90°
600 mm
820 mm
100 mm
580 mm
80 mm
90°
Inlet/outlet area
and electrical con-
nection.
CAUTION!
Risk of injury!
Improper handling of the appliance
may lead to injuries.
■
The appliance is heavy and bulky. Seek
the help of another person during
transport, installation and assembly.
■
If a trolley is used to move the appli-
ance, the appliance must be moved
as shown on the packaging.
■
Only lift the appliance as shown on
the packaging.
■
Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
Installation and connection
Having the outlet hose
connected
Connecting the outlet hose (22) to the trap
(siphon) of your washbasin/sink requires spe-
cialist work.
For this reason, the outlet hose may only be
connected by a professional plumber or a
member of our service department (see “Ser-
vice” on page EN-39).
NOTICE
Potential malfunction!
Failure to connect the appliance cor-
rectly may cause malfunctions during
operation.
■
Make sure that the waste water can
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40 mm.
■
Ensure that there are no kinks or dam-
age to the outlet hose.
■
Make sure that the end of the hose is
not submerged in the pumped water.
■
Do not extend the outlet hose or re-
place with another drainage pipe.
• Connect the outlet hose’s outlet as fol-
lows:
