Page EN-14
Dishwasher detergents, rinse aids and dishwasher salts
Adding dishwasher detergent
Only use dishwasher detergent which is in-
tended specifically for dishwashers. Carry
out a test run
without
dishwasher deter-
gent before the first use (see “Test run” on
page EN-35).
(25)
(21)
1. Pull back the catch (25) on the detergent
dispenser (21).
The cover will pop open.
(26)
(27)
2. The large compartment (26) is the main
wash compartment; the small one (27) is
the pre-wash compartment.
3. Add dishwasher detergent.
– For dishwashing programme with a pre-
wash cycle, put
–
⅔
into the main wash compart-
ment (26) and
–
⅓
into the pre-wash compartment (27).
– For dishwashing programmes without a
pre-wash cycle, put the whole amount
into the main wash compartment (26).
4. Push the dispenser cover closed so that
the catch (25) clicks into place once
again.
Adding rinse aid
NOTICE
Risk of damage!
Using an excessive amount of rinse aid
can lead to increased foaming and can
compromise the rinsing results.
■
Wipe away rinse aid which has over-
fl owed immediately.
■
Take note of the markings for the
maximum fi ll quantities (“max”) in
the rinse aid chamber.
Using unsuitable substances can cause
damage to the appliance.
■
Only put rinse aids which are suita-
ble for dishwashers into the rinse aid
chamber.
(12)
Prior to the first use and when the “Add rinse
aid” indicator (12) lights up, add rinse aid.
As rinse aid is automatically dispensed during
operation, it ensures that the dishes are spot-
free and accelerates the drying process.
