Page EN-38
First use
Problem
Possible cause
Solution
3
The control display for
the dishwasher salt
is displayed although
dishwasher salt has
been refilled.
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the end of a
spoon or similar.
4
The water is not
running or it is running
only very slowly.
There is a kink in the inlet
hose.
Lay out the inlet hose in such a manner that it
is not kinked.
The water tap is not
properly on.
Turn the water tap on completely.
5
The water is not
running off or only very
slowly.
The filters are blocked.
Clean the filters (see„Checking and cleaning
the filters“ on page EN-27).
The outlet hose is kinked,
has been extended or is
hanging too high up/too
low.
Lay out the outlet hose in the proper manner
(see„Having the outlet hose connected“ on
page EN-29).
6
The dishwasher is not
watertight.
The door seal is defec-
tive.
Have the door seal replaced (see„Service“ on
page EN-40).
The outlet hose or the
inlet hose is defective.
Have the defective hose replaced
(see„Service“ on page EN-40).
7
There are residues or
streaks on the dishes.
The rinse aid is incorrectly
dosed.
Adjust the dispensed dose (see„Changing the
rinse aid dose“ on page EN-15).
There is no dishwasher
salt.
Add dishwasher salt (see„Adding dishwasher
salt“ on page EN-16).
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the end of a
spoon or similar.
8
The dishwasher can
be switched on/off,
but not cannot be op-
erated.
The dishwasher can only
be operated when the
door is closed.
Close the door.
9
The dishes are not
completely clean.
There are food scraps
which are encrusted onto
the dishes.
Soak dirty dishes prior to washing the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that all parts
can be reached by the water jets (see„Loading
the dishwasher“ on page EN-17).
You have selected the in-
correct programme.
Select the correct programme using the
programme table (see„Programme table“ on
page EN-21).
The dishwasher detergent
is incorrectly dosed.
Dose the dishwasher detergent according to
the programme table (see„Programme table“
on page EN-21), the packaging information and
your degree of water hardness.
The water pressure is too
low.
Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are impeding the mo-
tion of the spraying arm.
The nozzles on the spray-
ing arm are blocked/
calcified.
Clean the nozzles (see„Checking and clean-
ing the spraying arms“ on page EN-28).
