Page EN-37
Troubleshooting table
The dishwashing results are not satisfactory
Problem
Possible cause
Solution
There are residues
or streaks on the
dishes.
The rinse aid is incorrectly
dosed.
Adjust the dosage (see „Adjusting the rinse aid
dosage“ on page EN-15)).
There is no dishwasher salt.
Add dishwasher salt (see „Adding dishwasher
salt“ on page EN-16).
The dishwasher salt is clumpy. Stir the dishwasher salt using the end of a
spoon or similar.
The dishes are not
completely clean.
There are food scraps which
are encrusted onto the dishes.
Soak dirty dishes prior to washing the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that all parts
can be reached by the water jets (see „Loading
the dishwasher“ on page EN-17).
You have selected the incor-
rect dishwashing programme.
Select the correct dishwashing programme
(see „Programme table“ on page EN-21).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dishwasher detergent
(see „Programme table“ on page EN-21).
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are impeding the motion
of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see „Checking and cleaning
the spraying arms“ on page EN-27).
Only one spraying arm is
active.
See „Selecting a spraying arm(s)“ on page EN-23.