Fridge-freezer assembly instructions
Page EN-23
(28)
(27)
(23)
7. Position both appliances correctly
so that the holes in the connecting
piece (23) sit perfectly over the screw
holes in the appliance bases.
8. Tighten the connecting piece (27) to the
appliance bases underneath using the
cross-head screws and cover up the
cross-head screws with the caps (28).
(25)
9. Press the middle profile (25) into the gap
between the appliances.
(24)
(31)
10. Place the cover (24) on the front con-
necting plate. Slide the panel (31) into
the gap between the appliances.
11. Pull the cover backwards slightly, while
pressing on the connecting plate.
The cover will lock into the connecting
plate with a click.
You have successfully set up the fridge-freez-
er.
Connecting appliances
NOTICE
Risk of damage!
If the appliance has been transported
horizontally, lubricant from the com-
pressor may make its way into the cool-
ing circuit.
■
Allow the appliances to stand upright
for approx. 2 hours before connect-
ing. This allows the lubricant enough
time to fl ow back into the compres-
sor.
To connect the appliances to the power sup-
ply you will need two separate plug sockets
with a correctly installed protective conductor.
• Insert the mains plugs into easily acces-
sible sockets, each with 220–240 V~ /
50 Hz.
