(3)
3. Level out any unevenness on the ground
using the two front screw feet (3).
– Close the door.
– Tilt the appliance slightly back and screw
in/unscrew the screw feet (3).
– Stand the appliance back up again and
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the door.
Attaching door handles
(15)
1. Unscrew the blind plugs (15) from the
door.
(16)
(16)
(17)
(17)
(18)
2. Secure the door handle (18) to the door
using the screws provided (16).
3. Cover the screw heads with the enclosed
decorative plugs (17)
Cleaning before use
In order to remove the odour which is present
in all new appliances, wipe the interior with
diluted vinegar prior to first use. Then wipe it
out with clean water and dry all of the parts
off afterwards.
Commissioning the appliance
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■
Do not operate or continue to oper-
ate the appliance if
–
it shows visible signs of damage,
for example, the mains cable is de-
fective,
–
starts smoking or there is a smell of
burning,
–
it makes unfamiliar noises.
Start-up
Page EN-26
