HGS14355FW, HGS14355FS
Safety
EN-5
• The appliance corresponds to protec-
tion class I and may only be connect-
ed to a plug with a protective conduc-
tor that has been properly installed.
When connecting the appliance, make
sure that the voltage is correct. More
detailed information about this can be
found on the nameplate.
• To disconnect this appliance from the
power supply, pull the mains plug out
of the socket. The appliance must,
therefore, be connected to an easily
accessible socket so that it can be
quickly disconnected from the power
supply in the event of a breakdown.
• When positioning the appliance, en-
sure the supply cord is not trapped or
damaged. Do not kink the supply cord
or lay it over sharp edges.
• Keep the supply cord away from na-
ked flames and hot surfaces.
• Always pull on the mains plug and not
the mains cable.
• Never touch the mains plug with wet
hands.
• Never immerse the supply cord or
plug in water or any other liquids.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified per-
sons in order to avoid a hazard.
• Independent or improper repairs made
to the appliance may cause damage
to property and personal injury; any
liability and warranty claims will be
forfeited. Never try to repair a defec-
tive or suspected defective appliance
yourself.
• Inspections and repairs to the appli-
ance may only be carried out by au-
thorised specialists. If in doubt, con-
tact our service department (see page
EN-22).
• This appliance contains electrical and
mechanical parts which are essential
for protection against potential sourc-
es of danger. Only parts correspond-
ing to the original appliance specifica-
tions may be used for repairs.
• In the event of a fault, as well as before
extensive cleaning, pull out the mains
plug or isolate/unscrew the fuse.
• Do not put any objects in or through
the housing openings, and also en-
sure that children cannot insert any
objects into them.
• Check the appliance regularly for
damage.
Fire hazard!
Improper handling of the appliance can
lead to fire and damage to property.
• Do not connect to a timer or a sepa-
rate remote-controlled system for dis-
tance monitoring and control.
• Do not locate multiple portable socket
outlets or portable power supplies at
the rear of the appliance.
Risks associated with using
refrigerants
Warning
Risk of fire and explosion!
Your appliance’s refrigeration circuit
contains the environmentally friendly,
but flammable refrigerant R600a (isobu-
tane).
• Do not use mechanical devices or
other means to accelerate the de-
frosting process, other than those
recommended by the manufacturer.
For example, do not use any electric
heating equipment, knives or devices
