Page EN-30
Set-up, connection and initial start-up
Choosing a suitable location
CAUTION!
Risk of injury!
The appliance is heavy and bulky.
Improper handling of the appliance
may result in injury.
■
Seek the help of another person during
transport, installation and assembly.
■
If a trolley is used to move the appli-
ance, the appliance must be moved
as shown on the packaging.
■
Only lift the appliance as shown on
the packaging.
■
Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin or the floor
drain.
Positioning
You can position the dishwasher in two ways:
– as a freestanding appliance in the room.
The space requirement corresponds to the
aforementioned appliance dimensions.
– built under a worktop. In this case,
you must take the required recess dimen-
sions into consideration.
• Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
Set-up, connection and initial start-up
Freestanding
59.8 cm
60.0 cm
84.5 cm
Appliance measurements
1. Place the dishwasher in the desired
position.
(38)
2. To equalise unevenness in the floor and
set up the dishwasher on a level horizon-
tal base, you can screw the two adjusta-
ble (38) feet in or out. The adjustable feet
have slots around their circumference.
Insert a screwdriver and turn the adjusta-
ble foot.
Use a spirit level to set up the dishwasher.
