Page EN-35
Troubleshooting table
Troubleshooting table
Problems with operation
Problem
Possible cause
Solution
Signal tones must
sound
This is not an appliance fault. See „Signal tones“ on page EN-24.
The display will switch
off.
This is not an appliance fault. See „Display“ on page EN-24.
The appliance door
will open automatically.
This is not an appliance fault. The door opens automatically at
the end of a programme run to allow the hot steam to escape.
The dishwasher can-
not be switched on.
The mains plug has not
been inserted into a
socket.
Connect the mains plug to a prop-
erly installed socket.
There is no voltage
being supplied through
the socket.
Check the fuse. Check the socket
by connecting another device.
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■
Only authorised specialists may
repair the dishwasher. If in doubt,
contact our service department
(see page EN-39).
■
Only carry out the actions which are
described in this user manual.
■
Never repair defective dishwashers
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page EN-39).
■
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a programme.
