Operation Page GB-19
Automatic switch-off
function
The appliance and the hotplate
will normally switch off after 40
minutes automatically. To save
energy, you can set an earlier
switch-off time for the hotplate
(can be set from 1 to 40 min-
utes). This setting is not saved,
but the process must be repeated
every time the coffee machine is
switched on.
MIN
STD
PROG
(1)
(6)
(5)
1. Switch the coffee machine on
or off using the AN/AUS button
(4).
The control light (3) is illumi-
nated in red.
2. Press the PROG button (1)
twice.
On the display the cup symbol
is flashing.
3. Set the desired keep-warm
time with the MIN button (5).
Around 5 seconds after you
last press the button, the
standard display will once
again appear.
The cup symbol
will no
longer flash.
4. Once the keep-warm time has
elapsed the control light will go
out (3). The appliance will go
back into standby mode.
Drip protection
Max
12
10
8
6
4
2
AN/AUS
MIN
STD
PROG
(16)
Your coffee machine is equipped
with a drip protector (16) which
seals the filter outlet as soon as
you take away the coffee pot. This
means that no coffee will run out
onto the hotplate.
Only remove the coffee pot
for a short time, as hot wa-
ter will continue to run into the
fi
l-
ter and can cause it to over
fl
ow.