Positioning
Page EN-25
6. Use a metal detector to make sure there
are no cables or piping in the area to be
drilled. If there are, select another location
for assembly.
7. Drill a dowel hole in each marked posi-
tions using a masonry drill.
8. For solid walls: Place the supplied dowels
into the holes. Screw the tilt protection
tight with the supplied screws.
For drywalls: Obtain suitable special dow-
els for the wall. If necessary, consult a
professional.
Screw the tilt protection to the wall with
suitable screws for the dowels.
9. Slide the cooker into place and check
that the tilt protection prevents the cook-
er from tipping forward.
Make any adjustments necessary.
Removing transport locks
• If you have not already done so, remove
any plastic strips from the sides of the
baking sheets.
• Remove all protective films.
