Before starting to use the
appliance
• Read chapter "Safety“ from page EN-4, in
particular all the safety notices.
Transporting, unpacking and
setup
WARNING
Risk of suffocation!
Children can become entangled in the
packaging fi lm or swallow small parts
and suffocate.
■
Do not allow children to play with the
packaging fi lm.
CAUTION
Risk of injury!
Improper handling of the appliance
may result in injury.
■
The appliance is heavy and bulky.
Seek the help of another person when
moving the appliance.
■
Drawers, doors etc. must not be used
as steps or for support purposes.
Dangers from the refrigerant!
Your appliance’s refrigeration circuit
contains the environmentally friend-
ly, but fl ammable refrigerant R600a
(isobutane).
■
Do not damage the refrigeration cir-
cuit, for example by piercing the re-
frigerant channels of the condensate
vaporiser with sharp objects, cutting
off the tubing, etc.
■
The refrigerant is fl ammable when
spurting out and can damage the
eyes. If this happens, rinse eyes with
clean water and seek medical assis-
tance immediately.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
■
If possible, do not tilt the cooling ap-
pliance horizontally.
■
Do not use sharp or pointed objects
to unpack it.
■
When unpacking the appliance, nev-
er damage the insulation material on
the back of the appliance.
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Always adhere to the prescribed am-
bient temperature (see “Intended
use” on page EN-4)
1. Unpack the appliance and carefully re-
move all packaging, plastic moulding,
adhesive strips, protective film and foam
padding from the inside, outside and back
of the appliance.
2. Proceed as described in chapter “Installa-
tion in a kitchen unit” (see page EN-29).
3.
Cleaning before use
In order to remove the odour which is present
in all new appliances, wipe the interior with
diluted vinegar prior to first use. Then wipe it
out with clean water and dry all of the parts
off afterwards.
Start-up
Start-up
Page EN-24
