13
Control panel
5 5 Settings menu
Pumps
Press the JETS button once to turn Pump 1 On or Off , and to shift between low-speed
and high-speed if equipped. If left running, Pump 1 will turn Off after a time-out
period. If your spa does not have a circulation pump, Pump 1 will run at low speed when
the blower or any other pump is on. If the spa is in Ready Mode (view chapter 5.8.2),
Pump 1 low may also activate for at least 1 minute every once in a while to detect the
spa temperature (polling) and then to heat to the set temperature if needed. When the
low-speed turns on automatically, it cannot be deactivated from the panel, however
the high speed may be started.
I
II
III
IV
V
Summary of Contents for TP 700
Page 1: ...USER MANUAL TP 700 ...
