HANSCRAFT TP 700, User Manual

Page: 12 / 40

12
Control panel
Filtration and ozone
If your spa does not have a circulation pump, pump 1 low and the ozone generator
will run during a filter cycle. If your spa has a circulation pump, the ozone will run
with the circulation pump. Many control systems are factory-programmed with
one filter cycle that will run in the evening (assuming the time-of-day is properly
set) when energy rates are often lower. The filter cycle time and duration are
programmable (view chapter 5.6). A second filter cycle can be enabled as needed.
At the start of each filter cycle, any additional water devices (such as pumps and
blower) will also run briefly to purge its plumbing to maintain good water quality.
Freeze protection
If the temperature sensors within the control system’s heater detect a low enough
temperature, then the pump(s) and the blower automatically activate to provide
freeze protection. The pump(s) and blower will run either continuously or periodically
depending on conditions. In colder climates, an optional additional freeze sensor may
be added to protect against freeze conditions that may not be sensed by the standard
sensors. Auxiliary freeze sensor protection acts similarly except with the temperature
thresholds determined by the switch. See your dealer for details.
Cleanup cycle (Optional)
When a pump or blower is turned on by pressing a button on the panel, a clean-up
cycle begins 30 minutes after the pump or blower is turned Off or times out. The pump
and the ozone generator will run for 30 minutes or more, depending on the control
system. On some control systems, you can change this setting.
5 4 Spa behavior
– Select JETS 1 . When you select an icon, its name appears at the top of the
screen .
– Press the SELECT navigation button to run the spa device.
The spa device is running.
If you want to navigate back to the main screen, select the Back button and press
the SELECT navigation button. The main screen will appear. The functionality of each
spa device may vary. For example, some devices may have a single speed or state,
while other spa devices may have multiple speeds or states. Your spa confi guration
will determine the number of spa devices and the functionality of each device. One
Spa screen can display a maximum of six devices. If your spa has more than six,
a menu arrow will appear . Press the RIGHT navigation button to view and/or run
the other spa devices.