12
Control panel/Trouble shooting
5 .12 Hold-on mode
The hold mode is used to disconnect the pumps during servicing, such as cleaning or
filter replacement. Hold mode will last for 1 hour unless canceled manually. If it takes
more time to service the spa, it is better to turn off the power to the spa.
5 .13 Information
The system information menu displays various settings and identification of a particular
system. Since each menu item is highlighted, the detail of this item is displayed at the
bottom of the screen. You can find it in the settings section 2 under the title info.
Software ID (SSID)
shows the software ID of the system
system
shows the system model number
current settings
displays information for button configuration (service)
heating power input
shows operating el. the voltage that is configured
heating type
standard heating
DIP switch setting
shows the number that represents the positions of the
fuse line S1 on the main distribution board
display version
shows the software number in the top control panel
Settings
Info
?
6 Trouble shooting
Most of the messages show up in the lower left corner of the screen.
– – °F – – –°C
The water temperature is unknown
The current temperature will show up after 1 minute of the circulation
pump running.
GENERAL REPORTS
