10
Control panel
5 .8 Jets
Select the jets button on the main screen. Select the jets in the following menu (the
number and function of the buttons depends on the settings of the control unit and
the whirlpool equipment). If the function is active, the button is highlighted. The
intensity at which the pump is on is represented by the wheels that circulate the
button around the wheel. If the whirlpool is equipped with two speed pumps, the
button has two levels, the first circulates two wheels for circulation and four at the
start of the massage circuit. In case the whirlpool has only one-speed pumps, there is
a possibility to switch the pumps on or off.
The water flow rate through the nozzles can be adjusted by turning the nozzles to
the left or right. Therefore, if water is not flowing through the nozzle, it may not be a
malfunction; the nozzle may only be closed. Not all nozzles can be regulated in this way.
It is also possible to regulate the power of the massage while the massage engine is
running by turning the air intake valve at the top of the whirlpool.
5 .9 Display rotation
On the main screen, in the upper right corner, there is a button to rotate the display.
Jets
Jets
5 .10 Other settings
This menu allows the user to change certain parameters according to their prefer-
ences: Temperature switching between Celsius and Fahrenheit. From the main screen,
