HANSCRAFT Evolution 25, Installation Instructions Manual

Page: 16 / 22

(1) You should check the water supply system regularly as to avoid the air entering the system
and occurrence of low water flow, because it would reduce the performance and reliability
of pool heat pump unit.
(2) Clean your spas and filtration system regularly to avoid the damage of the unit as a
result of the dirty of clogged filter.
(3) Keep the HP unit dry, clean, well-ventilated and always clean air side of the heat exchanger,
which can maintain a good heat exchanger and energy saving.
(4) Only a qualified service technician is allowed to operate pressure of the refrigeration system.
(5) Check power cable connection, if heat pump starts to operate abnormally, you should turn
it off and contact with qualified technicians.
(6) You should the water from water pump and other water system, to prevent from the
freezing damage in winter seasons.
(7)
(8)
.
drain
The heat pump and all associated pipe work must be drained down during winter or freezing
conditions.
Always flush with clean water and check thoroughly before recommissioning
the heat pump
WARNING
(
1
) .
(
2
)
If you are not familiar with your water filtration system and heater
(
a
)
Do not try to adjust, consult the professional dealer.
(
b
)
Before use, please read the Installation and User's Guide
.
Note: power supply before
Incorrect installation could result in personal injury.
Do not adjust internal control
TURN OFF any maintenance work
8. Maintenance
9. Troubleshooting guide
POOL HEAT PUMP
14