19
TURN ON THE APPLIANCE AND SELECT PROGRAMME
Change programme
1
You can change the programme only if it ran for a short time. Otherwise, the appliance has already
released the detergent and drained water. In this case, you must add the detergent.
1. Open the door and appliance will pause the programme.
2. Press and hold programme selector button for more than 3 seconds, the appliance will be in standby
mode and you can change the programme to the desired setting
If you open the door during a programme, it will be paused. You will hear a been every 1 minute
until you close the dishwasher door. When you close the door, the dishwasher will resume the
programme after about 10 seconds.
Summary of Contents for ZIM 676 H
Page 31: ...31 ...
Page 32: ...IO DWS 0266 11 2015 ...