Hansa C13 O&M Manual - OM-007 Revision L 28/06/2021
© Hansa Chippers 2020
4
Close the locking hinge and fasten the
two m6 bolts, spring washers, and
washers to the locking pin on each side
of the outlet using a 10 mm spanner.
Ensure the spring washer is between
the bolt head and washer.
Tighten the outlet chute locking handle
to secure the outlet chute to the
chipper body.
Note
: The outlet chute locking handle
will be in the documentation package.
Fit the inlet chute
Fix the inlet chute - place the inlet
chute onto the chipper body with the
black rubber flap sandwiched in
between and ensure all three holes line
up. Tighten the nuts, washers, and
bolts using a 16 mm and 17 mm
spanner. Ensure that the washer is
touching the bolt head.
Line up holes and insert the bolts,
washers and nuts, ensuring the big
washer is touching the bolt head.
3
4
5
Outlet
chute
locking
handle
