HANSA-FLEX HF-AUFROLLER-LUFT, Operating Manual

Page: 5 / 7

HANSA-FLEX AG Seite/Page 5/7 06/2022
English
Congratulations on your excellent choice of product. It has been manufactured to a very high standard of quality to
ensure it performs efficiently and safely for you over a long service life.
CAUTION !
Before you start using the product, please read carefully through the adjacent safety instructions. Before using the
product for the first time, read carefully through the operating instructions and familiarise yourself with how to set it
down safely in an emergency. Improper use of the product can lead to personal injury or damage to the product. Keep
these operating instructions safe in an easily accessible place so that you can consult them whenever necessary.
The safety devices integrated into the product by the manufacturer must never be deactivated or modified.
GENERAL SAFETY INSTRUCTIONS
1. The product must not be used by children, or people who are unfamiliar with it.
2. Always check that the product is complete, undamaged and working properly; otherwise the user could be placed
in serious danger.
3. Do not dismantle or modify individual parts of the product.
4. Do not place objects into the opening of the hose reel during the winding or unwinding process.
5. Do not let go of the hose during the winding or unwinding process.
INSTALLATION
Always use fastening materials suitable for the specific situation when fastening the product to the wall or in another
suitable location. Ensure that the feeder hose cannot become trapped or damaged during use of the product.
The product is fitted with a ratchet stop system to enable the hose to be latched in almost any unwound position the
user requires. A quick pull on the hose unlatches the ratchet stop system to allow the user to pull out the required
length of hose. The user must then bring the hose into a latched position to relieve the tension on the product while
working. The air hose reel is fitted with a ratchet stop system, which latches the hose in the required unwound po-
sition. The ratchet stop system can be switched off to allow the air hose to be freely unwound, as illustrated in the
drawing on page 2.
AIR SUPPLY CONNECTION
1. Connect the air hose reel feeder hose to the compressed air supply. The indicated maximum pressure of the sup-
ply must not exceed the maximum pressure given in the air hose reel datasheet!
2. If the maximum supply pressure is higher than the value in the datasheet, a pressure reducer must be integrated
into the connection line.
3. A quick release coupling can be mounted on the end of the hose so that tools can be changed quickly.
4. Do not use the product with gases or flammable liquids.
5. Do not use corrosive liquids (e.g. acids) or other liquids incompatible with the reel.
MAINTENANCE
Regular:
• Check that the spring works properly and the hose winds onto the reel correctly
• Check for leaks and replace seals if necessary
• Check that the hose is complete and undamaged and remove any dirt
• Check that the ratchet stop system works properly
• Check the fastening of the reel to the wall
• Check the plug-in connector and coupling