4
Assembly see page 31
Safety Notes
Gloves should be worn during installation to
prevent crushing and cutting injuries.
The product may only be used for bathing,
hygienic and body cleaning purposes.
Do not allow the streams of the shower touch
sensitive body parts (such as your eyes). An
adequate distance must be kept between the
shower and you.
The product may not be used as a holding han-
dle. A separate handle must be installed.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for
transport damages. After it has been installed, no
transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
Safety against backflow
The product is exclusively designed for drinking
water!
English
Cleaning
(see page 40) and
enclosed brochure
Flow diagram
(see page 34)
Hand shower
Bath Spout
Dimensions
(see page 34)
Spare parts
(see page 37)
XXX = Colors
000 = chrome plated
090 = chrome plated/gold plated
990 = gold plated
Symbol description
Do not use silicone containing acetic
acid!
Operation
(see page 38)
Maintenance check valve
(see page 35)
The check valves must be checked
regularly according to DIN EN 1717 in
accordance with national or regional
regulations (at least once a year).
Maintenance Secuflex hose
(see page 35)
Repeat cleaning when pull out becomes
difficult.
Summary of Contents for Metris 31315 Series
