Hans Grohe AXOR Fontana One Shower 91235000, Instructions For Use Manual

Page: 4 / 40

4 EN
A S S E M B L Y (see page 32)
S A F E T Y N O T E S
I N T E N D E D U S E
The “Fontana” must be used for the purpose of presentation only.
It is not allowed to make arbitrary changes to this product! Use the “Fontana” only
with Hansgrohe products! Application of products by other manufacturers will void
the warranty!
N O N - I N T E N D E D U S E
The "Fontana" may not be used for bathing, hygienic and body cleaning purposes!
A different or excessive use is considered non-intended. The user/operator bears
the sole risk. The intended use includes the adherence to the operating instructions
and the observance of the inspection and maintenance guidelines.
This appliance may be used by children aged 8 years and up and by persons who
are physically or mentally handicapped, have restricted sensory capabilities or
lack of know-how and experience, provided they use it under supervision or have
been given instructions on the safe use of the appliance and understand the
hazards involved. Do not allow children to play with the appliance. Do not allow
children to clean the appliance and do maintenance operations unless under
supervision.
The manufacturer/seller of this product does not assume any responsibility for
injuries or damage that may be caused by improper installation or non-intended
use.
E L E C T R I C A L I N S T A L L A T I O N
E L E C T R I C I A N
Installation and tests are to be performed by an approved electrician, taking DIN
VDE 0100-718 into account. It's a Legal Requirement for the Installation and wiring
to conform to current IEE Electrical and Building regulations.
A safety check must be performed according to DGUV V3.
E L E C T R I C A L C O N N E C T I O N
Voltage supply: 230V AC 50 - 60Hz
The connection of the “Fontana” must be carried out via an easily accessible
socket or an all-pole mains switch.
R E S I D U A L C U R R E N T P R O T E C T I O N S Y S T E M
The circuit must be protected via a ground fault protector (RCD / FI) with a
measured differential current of ≤ 30 mA.
The proper function of this protective device must be checked at regular intervals.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Wear personal protective equipment (PPE) (safety shoes, gloves, etc.)
⁄ Any work may only be carried out in a de-energized state.
⁄ All components must remain accessible.
⁄ Finish assembling and positioning before you connect the mains plug to the power
socket.
⁄ Do not try to exchange a damaged connection cable but have the manufacturer
replace it.
⁄ The required minimum floor load is 200 kg/m². The floor must be levelled properly,
i.e. it must be horizontal and even.
⁄ It is not allowed to restrict or block escape routes!
⁄ It is not allowed to connect displays elements firmly with building parts!
⁄ The "Fontana" may only be operated with distilled water.
⁄ In pump operation, the pump must be vented or filled with water before the first use.
⁄ Protect from freezing!
⁄ After installing the fountain, a leak test must be performed.
⁄ Confirm the proper execution of the test on the respective page of the installation
instructions and send it to Hansgrohe SE.
⁄ To save electricity, Hansgrohe recommends switching off the "Fontana" in the
evening or during longer periods of standstill.
T E C H N I C A L D A T A
Nominal voltage:
230V AC 50 - 60Hz
Nominal consumption: 800 W
weight: 160 kg
Dimensions: see page 32
Protection category: IPX4
Protection class: I
Water temperature: max. 30°C
Noise emission: < 70 dB(A)
Serial number 91218000 ⁄ 91224000 ⁄ 91235000 (see typeplate)
S Y M B O L D E S C R I P T I O N
D I M E N S I O N S (see page 32)
S P A R E P A R T S (see page 38)
W I R I N G D I A G R A M (see page 38)
O P E R A T I O N (see page 35)
⁄ The preservation of the water quality is in the operator’s responsibility! The
included treatment agent must be applied according to the manufacturer's
instructions. After using up the treatment agent, the operator must procure
suitable replacement on his own initiative! Source of supply of water
treatment products: www.katadyn.com
⁄ The water level must be checked daily!
⁄ The water must be changed regularly (every week)! If the water through-
put rate is low, the filter must be cleaned.
⁄ To guarantee a perfect function of the showers, the reservoir must be
cleaned regularly (every week).
⁄ If the pump fails, the protections and / or the temperature protection must
be checked.
C L E A N I N G (see page 36)
⁄ To guarantee a perfect function of the showers, the reservoir must be
cleaned regularly (every week).
⁄ If the water throughput rate is low, the filter must be cleaned.
N O D R I N K I N G W A T E R