6
7
English
Assembly
Important! The fitting must be installed,
flushed and tested after the valid norms.
1. Flush through the supply pipes.
2. Mount the fittings.
3. Push the level into the holes of the fittings and
align them.
4. Push on mixer and tighten allen srews.
11600XXX:
5. Mount the lever head and tighten the allen
screw.
6. Fit on screw cover.
The hot and cold supplies must be of equal pres-
sures.
Operation
The mixer is activated by pulling the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
11400XXX: The flow is changed from bath to shower
function by pulling the knob at the upper side of the
spout. After shutting off the water flow, the mixer
returns automatically to the bath function.
Technical Data
Operating pressure: max. 10 bars
Recommended operating pressure: 1 - 5 bars
Test pressure: 16 bars
Hot water temperature: max. 80° C
Recommended hot water temp.: 65° C
Centre distance: 153 ± 16 mm
Connections G 1⁄2”: cold right -
hot left
Rate of flow by 3 bars: approx. 22
l/min
Back flow and vacuum breaker
Hansgrohe single lever mixers can be used toge-
ther with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
To adjust the hot water limiter on single lever mixers,
please see page 13.
No adjustment is necessary when using a continuous
flow water heater.
Spare parts
(see page 3)
1 handle 11091000
2 aerator cpl. (10) 13485000
3 diverter knob 94102000
4 selector assy 94103000
5 cartridge cpl. 11095000
6 S - unions 94136000
7 non return valveDW 15 94074000
8 flange 96464000
9 interior spout 98559000
10 handle Arco 11691000
10.1 screw cover 94063000
10.2 hollow set screw M6x10 DIN 916 96029000
11 flange 94130000
12 nut 94106000
13 service set 13952000
14 packing kit (5) 13962000
15 mixer ball 13964000
16 cartridge cpl. 14096000