background image

2

Limited Lifetime Consumer Warranty

This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”).  This warranty is 
limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either 
the United States or Canada.

WHO IS COVERED BY THE WARRANTY

This warranty extends to the original consumer purchaser only.  This warranty is non-transferable.

WHAT IS COVERED BY THE WARRANTY

This warranty covers only your Hansgrohe manufactured product.  Hansgrohe warrants this product against defects in material or 
workmanship as follows: Hansgrohe will repair at no charge for parts only or, at its option, replace any product or part of the product 
that proves defective because of improper workmanship and/or material, under normal installation, use, service and maintenance.  If 
Hansgrohe is unable to provide a replacement and repair is not practical or cannot be timely made, Hansgrohe may elect to refund 
the purchase price in exchange for the return of the product.  

LENGTH OF WARRANTY

Replacement or repaired parts of products will be covered for the term of this warranty as stated in the following two sentences.  If 
you are a consumer who purchased the product for use primarily for personal, family, or household purposes, this warranty extends 
for as long as you own the product and the home in which the product is originally installed.  If you purchased the product for use 
primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with 
respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.  

THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR:

A.  Conditions, malfunctions or damage not resulting from defects in material or workmanship.

B.  Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, 

misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no-rinse” cleaning 
products, or the use of the product in any manner contrary to the product instructions. (3) Conditions in the home such as exces-
sive water pressure or corrosion.

C.  Labor or other expenses for the disconnection, deinstallation, or return of the product for warranty service, or for installation or 

reinstallation of the product (including but not limited to proper packaging and shipping costs), or for installation or reinstallation 
of the product.

D.  Accessories, connected materials and products, or related products not manufactured by Hansgrohe.

TO OBTAIN WARRANTY PARTS OR INFORMATION

Contact your Hansgrohe retailer, or contact Technical Service at:

Hansgrohe Inc.
1492 Bluegrass Lakes Parkway
Alpharetta GA  30004
Toll-free (800) 334-0455.

In requesting warranty service, you will need to provide

1.  The sales receipt or other evidence of the date and place of purchase.

2.  A description of the problem.

3.  Delivery of the product or the defective part, postage prepaid and carefully packed and insured, to Hansgrohe Inc. 1492 

Bluegrass Lakes Parkway, Alpharetta, Georgia 30004, Attention: Technical Service, if required by Hansgrohe.

When warranty service is completed, any repaired or replacement product or part will be returned to you postage prepaid. 

EXCLUSIONS AND LIMITATIONS

REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS PROVIDED UNDER THIS 
WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER.  HANSGROHE NEITHER ASSUMES NOR AUTHORIZES ANY 
PERSON TO CREATE FOR IT ANY OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT.

HANSGROHE SHALL NOT BE LIABLE TO PURCHASER OR ANY PERSON FOR ANY INCIDENTAL, SPECIAL, OR 
CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY (INCLUDING 
MERCHANTABILITY).

Summary of Contents for 04220 0 Series

























Reviews: