Hanover HSD0431 Assembly  & Care Manual Download Page 10

10 

Hanover Office Furniture 

2-Year Limited Warranty Program

For a period of two (2) years after purchase, Hanover Products (“Manufacturer”) will either repair or replace defective components in accordance 
with this Limited Warranty. This warranty is between Manufacturer and the original purchaser and is valid only when accompanied by the original 
purchaser’s sales receipt showing original date of purchase and location of purchase.  Replacements under this warranty revert back to the date of 
original purchase for future warranty.  

Manufacturer or its authorized dealer can accept or reject warranty claims based on its findings.  This warranty applies in normal office use only 
and is not intended for industrial or public use.  Manufacturer can make substitutions as required of materials, components, and sub-components 
of comparable value and utility.  This warranty is limited to product repair or replacement (to be determined solely by Manufacturer). Warranty 
replacement is limited to only the single affected component. 

This warranty covers only manufacturing defects and does not cover normal wear and tear, abuse or misuse, exposure to extreme heat or cold, 
abrasion or excessive weight.  This product is intended to be used in standard installations only.  This warranty is invalid if the product is not used 
for intended purpose.  Manufacturer disclaims liability for any aspect of installation and any inconvenience caused by a defective part of a 
component. 

Certain items are not covered by this warranty.  These include, but are not limited to the following:  

1.

Components subjected to abuse, including abuse intended to simulate failure.

2.

Damages caused by retailer, shipper or installation crew (such as scratches, dents, tears, chips, etc.).

3.

Any part which merely exhibits normal wear yet functions essentially as new, including chips, scratches or stretching of materials and 
stitching.

4.

Tears, punctures, scratches or any damage caused by improper installation or use.

5.

Damage to frames/welds resulting from improper assembly is not covered.  General frame rusting is not covered.

6.

Fading and/or discoloration of fabrics resulting from exposure to the elements, chemicals, oils, fluids or any other cause are not covered.

To make a claim, call the toll-free number below.  Please have available a copy of the original sales receipt along with a brief description of the 
problem.  Please also provide your email address and daytime telephone or cell phone #.  All items may be charged actual freight costs plus $15 for 
handling.  Repairs or replacement will be made at the Manufacturer’s option.  

Sales and use taxes, plus shipping and handling charges are the 

responsibility of the consumer. 

THIS IS THE ENTIRE EXCLUSIVE EXPRESS LIMITED LIABILITY. THE MANUFACTURER NEITHER MAKES NOR IS RESPONSIBLE FOR ANY OTHER WARRANTIES, EITHER 
EXPRESS OR IMPLIED, INCLUDING THOSE OF RETAILING DEALERS. THIS EXCLUSIVE REMEDY IS LIMITED TO RECEIPT OF A CREDIT IN CONNECTION WITH THE REPAIR 
OR REPLACEMENT OF ANY PRODUCT OR COMPONENT DEEMED TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS AS STATED IN THIS WARRANTY. NEITHER 
HANOVER PRODUCTS, THE PRODUCT MANUFACTURER NOR ITS AGENTS SHALL BE LIABLE IN ANY CASE FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY OR NEGLIGENCE EVEN IF IT HAS BEEN ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS OTHERWISE MAY BE REQUIRED BY LAW, THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OTHER THAN 
THE WARRANTY DESCRIBED HEREIN, AND ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE ARE EXPRESSLY DISCLAIMED. 

Contact Warranty Services at:  

[email protected] 
www.Hanover-Products.com 
877-397-5144

Summary of Contents for HSD0431











Reviews: