background image

                                                                                                                                       

User’s Manual

   

TECHNICAL SUPPORT (FAQ) 

Q & A FOR GENERAL PROBLEMS 

PROBLEM & QUESTION 

POSSIBLE SOLUTION 

Power LED is not on 

*Check if the Power Switch is in the ON position. 
*Power Cord should be connected. 

No Plug & Play 

*Check if the PC system is Plug & Play compatible. 
*Check if the Video Card is Plug & Play compatible.
*Check if any plug pins on the VGA or DVI 

connector are bent. 

The display is too dark or too bright. 

*Adjust the Contrast and Brightness Controls. 

Picture bounces or a wave pattern is 
present in the picture 

*Move electrical devices that may cause electrical 

interference. 

The power LED is ON (orange) but 
there’s no video or no picture. 

*Computer Power Switch should be in the ON 

position. 

*Computer Video Card should be snugly seated in its 

slot. 

*Make sure monitor’s video cable is properly 

connected to the computer. 

*Inspect monitor’s video cable and make sure none 

of the pins are bent. 

*Make sure computer is operational by hitting the 

CAPS LOCK key on the keyboard while observing 
the CAPS LOCK LED. The LED should either turn 
ON or OFF after hitting the CAPS LOCK key. 

Missing one of the primary colors (RED, 
GREEN, or BLUE) 

*Inspect the monitor’s video cable and make sure that 

none of the pins are bent. 

Screen image is not centered or sized 
properly. 

* Adjust pixel frequency CLOCK and PHASE or 

press hot-key 

( i Button)

.

 

Picture has color defects 

(White does not look white)

 

*Adjust RGB color or select color temperature.

 

The screen resolution needs to be adjusted

*Use win 2000/ME/XP Right click anywhere on 

desktop and select

 Properties

>

Settings

>

Screen 

Resolution

. Use the silder to adjust the reslution 

and click 

Apply.

 

No sound is outputted from monitor’s 
built-in speaker 

*Make sure PC audio output cable is connected to 

screen’s LINE IN port (or AUDIO IN port). 

*Make sure the sound volume adjustment can be 

clearly identified. 

*Make sure the 

System

 > 

Silence

 option in the 

monitor menu is on. 

*While transferring via HDMI port but no sound is 

outputted, it is recommended to select AUDIO 

19 

Summary of Contents for HF235DPB
























Reviews: