background image

                                                                                                                                       

User’s Manual

   

FRONT PANEL CONTROL 

 

 Power Button: 

Press this button to switch ON/OFF of monitor’s power.   
 

 Power Indicator: 

Green  —  Power On mode. 

 

 

Orange  —  Power Saving mode. 
 

  MENU / RETURN:   

1.  Turn the OSD menu on/off or return to the previous menu. 
2.  Exit OSD menu when in volume OSD status. 

 

 Adjust 

▲▼

:  

1.  Adjust Brightness and volume when the OSD is off. 
2.  Navigate through adjustment icons when OSD is ON or adjust a function when function is 

activated. 

 

 i 

Button:

 

Analog Input Models

 

1.  The OSD menu is used as

confirmation

function during start-up. 

2. The 

Auto adjustment

  function works only for VGA input. (The auto adjustment function is 

used to optimize the 

horizontal position

vertical position

,

clock

,and 

phase

.) 

 

 i 

Button:

 

Digital Input Models

 

1. Press

 i 

to enter Source selections. (Selections include VGA, HDMI, etc. The actual 

selections may very depending on the models. This function is only available in models with 
digital inputs) 

2.  The OSD menu is used as

confirmation

function during start-up. 

3.  Press and hold this button more than 3 seconds will start 

Auto Adjust

  function when using 

VGA input only. (The auto adjustment function is used to optimize the 

horizontal position

vertical position

,

clock

,and 

phase

.) 

 

 Hotkeys: 

   

1. Restore Brightness and Contrast defaults: 

        To reset both the Brightness and Contrast to their default values, press the 

and 

 keys 

at the same time. 

   

2. ASPECT RATIO: 

        Press

MENU

+

key to change to 

FULL MODE

 or 

FIT MODE

 

  3. Change Resolution: 

        For similar screen display resolutions (see table below), the screen resolution can be changed by 

pressing the

MENU

+

button to achieve the optimal display quality. 

 

  4. Change Preset Mode: 

[The availability of this function depends upon the selected model]

 

Press

MENU

key for 3 seconds to select one of the following modes

PC

,

MOVIE

,

GAME

,

ECO

. Default is

PC

 

13 

Summary of Contents for HF235DPB
























Reviews: