User’s Manual
INSTALLATION INSTRUCTIONS
INSTALL
REMOVE
Figure.1. Installing and Removing the Base
INSTALLATION:
1.
Align the monitor with the opening in the base.
2.
Note that the longer section of the base points forward.
3.
Snap the monitor into its base. A clear click sound will affirm that the base is connected
correctly.
4.
Verify that the monitor is securely attached to the base by looking at the bottom of the base and
making sure that the clips are fully engaged in the base.
5.
Fasten the screw.
REMOVAL:
1.
Flip over the monitor so that it is upside down.
2.
After loosen the screw, then press the 3 clips on the base that holds the monitor in place.
3.
Gently press and hold the 3 clips while pulling the base from the monitor unit they are
unattached.
.
Note:
For the first time installation, the screw must loosen before attaching the monitor to the base.
POWER
POWER SOURCE:
1.
Make sure that the power cord is the correct type required in your area.
2.
This LCD monitor has an Internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3.
Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to
wall-outlet.
9
Summary of Contents for Hanns.G HS278UPB
Page 1: ...HS278UPB HSG1289...
