HANNspree AT06, Service Manual

Page: 14 / 94

42
‟‟ LCD TV Hannspree AT06
16
Audio: Displays a dialog enabling the preferred language to be set, this is the language to be used for all channels if
it is available.
Subtitle: Displays a dialog enabling the preferred language to be set, this is the language to be used for all channels
if it is available.
Current: Displays a dialog enabling the current language to be set, this is the language to be used for the current
selected channel, please note that only languages available with the currently selected channel will be displayed.
Installation
Automatic Search
Manual Search
First Time Installation
Automatic Search
Automatic search is the ability for the reference application to scan each other (Frequency) for services.
Whilst performing an automatic tune no service will be selected. A dialog is displayed during automatic tuning that
shows the progress of the scan through the channels.
The user may cancel automatic tuning. If the previous list already stored, the lowest number from the service list, it
will return to “normal viewing” operation.
The Reference Application can support up to 70 services at any one time.
When you select Automatic search, press
OK button in remote control, and will start to automatic search.
Manual search
Manual Search
Signal Quality:
Signal Level
Manual search allows the user to scan an individual channel (frequency) for services .The user can perform a
manual tun
e by selecting an option on the “Main Menu”. Whilst performing a manual tune no service will be selected.
The user enters the channel number to be scanned; only those channels supported by the tuner may be entered.
The Manual tuning dialog displays a bar indicating the quality and strength of the signal of the currently selected
channel. The user can then choose to scan the selected channel for services; a separate dialog is displayed
showing the service found whilst scanning is taking place. Newly discovered services are merged with the current
list of services. The user may cancel manual tuning; in such cases any newly discovered services are disregarded.
When a manual tune is complete the application will attempt to select the previously selected service and return to
“normal viewing” operation. In cases were there was not a previously selected service the application will attempt to
select the service with the lowest number.
The Reference Application can support up to 70 services at any one time.
Press
0 to 9 to select a channel number; select to start searching
for channels, DTV MENU to exit this screen.
First time installation
Channel Number:
Manual tuning:
Do you want to start automatic search? Your
Previous channel list will be replaced.
YES No