HANNspree AT06, Service Manual

Page: 12 / 94

42
‟‟ LCD TV Hannspree AT06
14
INPUT SELECTION
To select TV/VIDEO source:
To select desire input source, press the SOURCE button to display the
selection menu.
Using the ^ / \/ buttons to select each input sources.
Press the OK button to display the desire input source.
DTV MENU
First-Time Installation
When the system is first switched on, the Reference Application attempts to configure itself for the first time. This is
called ”First Time Installation”.
The user is then asked if they wish to perform an automatic tune for services. Automatic tuning functionality is
described later in this document. When the automatic tune finishes and services have been found, the lowest
number service is selected and a banner describing that service is shown. A user may have chosen not to perform
an automatic tune or no services may have been found by an automatic scan. In this instance the user may use the
“Main Menu” to automatically scan again or perform a manual scan. The Reference Application also provides the
facility for the user to force t
o trigger a “First Time Installation”. This facility can be found in the “Main Menu” under
the “Installation” option.
Main Menu
Channel list
Favourites
Guides
Settings
Common Interface
A “Main Menu” is provided to enable the user to configure elements of the Reference Application. In “normal
viewing” operation a user can access the “Main Menu” by pressing the “DTVMENU” key. The “Main Menu” is
hierarchically organized into categories in order to fit on the screen.
Channel List
A user may configure the Reference Application to use exclusively TV, Radio or Data services, this feature is know
as channel List Model.
A user can select a channel List Mode using the configuration dialog; it is permitted to select a channel List Mode
that contains no services.
When the channel list mode is enabled the program up and down buttons on the remote control will only select those
services in the current channel List Mode. And all EPGs will only show those services in the current Channel List
Mode. It is still possible to select a service using the services even if it is not a member of the currently selected
channel List Mode. Note that if the user has selected a favourites list then the Channel List Mode acts as a filter on
top of the selected favourites list.