23
L O G G I N G
L O G G I N G
L O G G I N G
L O G G I N G
L O G G I N G
LOG DATA
The log on demand feature is active after a valid
measurement is obtained (no errors).
• To log a value, press LOG/CFM when a measurement
result is displayed. The meter asks to “READ TAG”
for identification of the sampling location.
• To give the ID code for the identification of the
sampling location, simply touch the iButton
®
tag
with the matching connector, located on the back
of the instrument (see page 9).
• If the tag is succesfully read, the meter will beep
once, displaying the unique hexadecimal string of
the tag, and store the data in a log record. Each
logged measurement is stored in a separate record,
with a different record number (e.g. “r06”).
• After the data is stored, the meter returns to the
measurement mode.
Note
: If the tag is not read within 20 seconds, the
logging procedure is canceled.
A measurement can be stored only once. Also
an over range value can be stored.
• To store a record without identification of the sam-
pling location, press LOG/CFM when “READ TAG” is
displayed. “----” will appear on the display.
• If another key is pressed, the log procedure is
canceled.
• If less than five free records are available, the
“LOG” will blink while storing data.
• If the log memory is full, the “Full” message
appears for two seconds and the meter returns to
the measurement mode.
Note
: See Delete Records for free log space.
