manualshive.com logo in svg

Hanna HI 96711, Instruction Manual, Page: 27 / 28

Share
Download
Hanna HI 96711 Instruction Manual Download Page 27

27

Before using this product, make sure that it is entirely suitable for your specific application and
for the environment in which it is used.
Operation of this instrument may cause unacceptable interferences to other electronic equipments,
requiring the user to follow all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade the instrument’s
EMC performance.
To avoid damage or burns, do not put the instrument in microwave ovens. For your own and the
instrument safety do not use or store the instrument in hazardous environments.

REAGENT SETS
HI 93701-01

Reagents for 100 Free Chlorine tests

HI 93701-03

Reagents for 300 Free Chlorine tests

HI 93711-01

Reagents for 100 Total Chlorine tests

HI 93711-03

Reagents for 300 Total Chlorine tests

OTHER ACCESSORIES

HI 95701-11

CAL CHECK™ Standard Cuvets     for Free Chlorine (1 set)

HI 95711-11

CAL CHECK™ Standard Cuvets     for Total Chlorine (1 set)

HI 731318

Tissue for wiping cuvets (4 pcs)

HI 731331

Glass cuvets (4 pcs)

HI 93703-50

Cuvets cleaning solution (230 mL)

HI 920005

5 tag holders with tags

HI 740027P

1.5V AA battery (12pcs)

HI 92000

Windows

®

 compatible software

HI 920011

5 to 9 pins RS232 connection cable

ACCESSORIES

ACCESSORIES

ACCESSORIES

ACCESSORIES

ACCESSORIES

Hanna Instruments reserves the right to modify the design, construction and appearance of its products

without advance notice.

RECOMMENDATIONS FOR USERS

RECOMMENDATIONS FOR USERS

RECOMMENDATIONS FOR USERS

RECOMMENDATIONS FOR USERS

RECOMMENDATIONS FOR USERS

Summary of Contents for HI 96711





























Reviews:

No comments