General Menu
Chlorine Menu
pH Menu
ORP Menu
Temperature Menu
If correct password is entered and confirmed, the analyzer will go in menu mode.
If wrong password is entered, the analyzer displays “Password incorrect. Settings are not allowed!”,
and the user could only view the analyzer parameters.
NAVIGATING THROUGH MENU
The menu is organized as a list of options. Each line of this list:
- could contain a sub-menu;
- could display an analyzer parameter,
- could start a function.
To select a menu line, press up or down arrow keys.
The selected line is signaled by a black square in the left side of the display.
If the menu continues outside the viewing area, a double up or down arrow is displayed on the first
or last line of the display.
As a general rule, the
CFM
key will descend into menu and
ESC
key will return to a higher level.
Pressing
CFM
key will make the following actions:
• descend into the sub-menu for sub-menu line.
• no action for parameter line.
• start the function for function line.
Pressing
ESC
key will make the following actions
• return in measure mode when in the main menu.
• return in the previous menu when in submenu.
• return from function before the normal ending when function is executing.
• exit from edit mode without saving.
MODIFY A PARAMETER
To modify a parameter, press
SET
key when a line that displays a parameter is selected.
The cursor will go to the first digit or letter of the parameter.
Note: If wrong password is entered, editing is not allowed.
The editing sequence depend upon the parameter type.
USER INTERF
ACE
32
