manualshive.com logo in svg

Hanna Instruments IRIS HI801, Instruction Manual, Page: 18 / 48

Share
Download
Hanna Instruments IRIS HI801 Instruction Manual Download Page 18

18 

6.1.5. BEEPER

Use the 

 key to access the beeper submenu.

The available options are: 

KEY PRESS

, 

ERRORS

 and 

TIMERS

.

KEY PRESS

Option: ON or OFF

If this option is 

ON

, a short beep is heard every time an active key is touched, a 

long beep is heard every time an inactive key is touched.

ERRORS

Option: ON or OFF

If this option is 

ON

, a long beep is heard every time an error occurs.

TIMERS

Option: ON or OFF

If this option is 

ON

, a long beep will be heard when a timer reaches "00:00".

6.1.6. LCD CONTRAST

Option: 0 to 7

Press 

EDIT

 key to change the displays contrast.

Use the 

or 

 key to increase or decrease the value.

Press the

 CFM 

key to save the value or the 

CLR

 key

 

to return to the setup menu 

without saving.

SETUP

6.1.4. SAMPLE ID

Option: ON or OFF

If this option is ON the user will be prompted to enter a sample ID when a 
measurement is saved.

Summary of Contents for IRIS HI801

















































Reviews:

No comments