45
LOGGING
12. LOGGING
The
HI981954
and the
HI7698195
multi-sensor probe offer two types of logging: meter only
parameters, and meter and probe parameters.
pH/ORP & EC/TDS/NaCl/R
esistivity
HI981954
pH/ORP & EC/TDS/NaCl/R
esistivity
HI9819
54
From measurement mode, press
Log
to access Log menu.
The data logged on the meter are organized by lots. Up to 45,000 complete records can be stored
in up to 100 lots. Each lot can store log-on-demand records and/or continuous records with different
parameter configurations.
12.1. ONE SAMPLE ON METER
1. Select “One sample on meter” to add one set of enabled measurement parameters to the
meter’s memory.
2. If there are existing lots on the meter, select the lot to log the sample in (use the suggested one
by pressing
OK
or press
Options
to select from the list).
If no lots have been saved or to create a new lot, press
New
. Use the keypad to enter desired lot
name and press
Accept
to confirm.
3. Press
OK
to log the sample in the selected lot.
4. The Remarks window will open, press
Yes
to add a remark to the data point or
No
to skip.
The meter will return to the measurement screen automatically.
