background image

26

CERTIFICA

TION

CERTIFICATION

All Hanna Instruments conform to the 

CE European Directives.

RoHS

compliant

Disposal of Electrical & Electronic Equipment.

 The product should not be treated 

as household waste. Instead hand it over to the appropriate collection point for the 
recycling of electrical and electronic equipment which will conserve natural resources.

Disposal of waste batteries.

 This product contains batteries, do not dispose of them with 

other household waste. Hand them over to the appropriate collection point for recycling.
Ensuring proper product and battery disposal prevents potential negative consequences 
for the environment and human health. For more information, contact your city, your local 
household waste disposal service, the place of purchase or go to 

www.hannainst.com

.

RECOMMENDATIONS FOR USERS

Before using this product, make sure it is entirely suitable for your specific application 
and for the environment in which it is used. Any variation introduced by the user to the 
supplied equipment may degrade the meter’s performance. For yours and the meter’s 
safety do not use or store the meter in hazardous environments.

WARRANTY

The 

HI97714

 is warranted for two years against defects in workmanship and materials 

when used for its intended purpose and maintained according to instructions. This 
warranty is limited to repair or replacement free of charge. Damage due to accidents, 
misuse, tampering or lack of prescribed maintenance is not covered. If service is 
required, contact your local Hanna Instruments Office. If under warranty, report the 
model number, date of purchase, serial number (engraved on the bottom of the meter) 
and the nature of the problem. If the repair is not covered by the warranty, you will be 
notified of the charges incurred. If the meter is to be returned to Hanna Instruments, 
first obtain a Returned Goods Authorization (RGA) number from the Technical Service 
department and then send it with shipping costs prepaid. When shipping any meter, 
make sure it is properly packed for complete protection.

MAN97714 11/19

Summary of Contents for HI97714





























Reviews: