44
Press the corresponding functional key in order to enable/disable this feature.
If enabled, a warning message is displayed when the EC reading is too far
from the EC calibration points.
Temperature source
Focus on the
Temperature source item.
Press the displayed functional key in order to change the option.
Select
Probe
in order to take the temperature automatic with the temperature
sensor inside the electrode.
Select
Manual
in order to set the temperature using the
ARROW
keys.
Temperature compensation
Focus on
Temperature compensation item.
Press one of the selected functional keys to change the option.
Select
No TC
in order to display actual conductivity. (no temperature compensation)
Select
Linear
in order to automatically compensate conductivity using the set
temperature coefficient.
Select
Non Linear
temperature compensation for natural water measure-
ments, using the natural water compensation equation.
Range Select
Focus on the
Range Select item.