background image

33

33

HI 766E2

 General use probe, max 900°C/1650°F

HI 766F

High temperature wire probe without handle, max 1100°C/2000°F

HI 766F1

 Flexible probe without handle, max 480°C/900°F

5

HI 766TV1

 Pipe clamp probe, max 200°C/390°F

1.5mm

0.06"

255mm

10"

1m

3.3’

2mm
0.08"

35mm

1.4"

Max.

360mm

13.8"

220mm

8.5"

5mm

0.2"

POWER UNITS

HI 710005

Voltage adapter from 115 VAC to 12 VDC

HI 710006

Voltage adapter from 230 VAC to 12 VDC

OTHER ACCESSORIES

HI 710031

Rugged carrying case

HI 710034

Plain Paper Rolls (10 pcs)

HI 710035

Spare Ink Cartridge (1 pc)

HI 721308

1.5V AA battery (10 pcs)

HI 9200

Infrared Transmitter

HI 92000

Windows

®

 software for data transfer to PC

MANKPRNR3

Instruction manual

Windows

®

 is registered Trademark of "Microsoft Co."

Untitled-27

34

34

WARRANTY

WARRANTY

WARRANTY

WARRANTY

WARRANTY

All Hanna Instruments

 meters are warranted for two years

against defects in workmanship and materials when used for their

intended purpose and maintained according to instructions.

The probes are warranted for a period of six months.

This warranty is limited to repair or replacement free of charge

.

Damages due to accidents, misuse, tampering or lack of prescribed

maintenance are not covered.
If service is required, contact the dealer from whom you purchased the

instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair

is not covered by the warranty, you will be notified of the charges

incurred.
If the instrument is to be returned to Hanna Instruments, first obtain

a Returned Goods Authorization Number from the Customer Service
department and then send it with shipment costs prepaid. When

shipping any instrument, make sure it is properly packaged for

complete protection.
To validate your warranty, fill out and return the enclosed warranty

card within 14 days from the date of purchase.

All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner,
Hanna Instruments Inc., 584 Park East Drive, Woonsocket,
Rhode Island, 02895, USA.

Hanna Instruments reserves the right to modify the design, con-

struction and appearance of its products without advance notice.

Summary of Contents for HI 92804



















Reviews: