background image

23

23

UP

DOWN

ALT

TEMP

DATE

To view the data stored in sample number 1 first use the UP and
DOWN keys to scroll through the sample numbers.

Once the number is displayed, press the ALT and TEMP keys. The

date during which that sample was taken will appear first.

Press the UP key to view the time.

Press the UP key again to view the temperature.

With HI92804 when more than one probe have been connected,

press the UP key to view the other channels values.
Step Six - Printing the stored data (samples 5 through 10):
Press and hold the ALT key and press the DOWN key until the total

number of samples recorded in log number 1 is displayed.

Scroll through the sample numbers by using either the UP or DOWN

keys until number 5 appears.

Press the ALT and PRINT keys. The meter will
print out samples number 5, 6, 7, 8, 9 and

10 consecutively.

TIME

CH

°C

UP

UP

UP

DOWN

DOWN

ALT

PRINT

ALT

Untitled-27

24

24

TIME

DATA TRANSFER TO PC

DATA TRANSFER TO PC

DATA TRANSFER TO PC

DATA TRANSFER TO PC

DATA TRANSFER TO PC

HI 92801

 and 

HI 92804

 provide infrared

emitting circuitry. Set the meter to the TIME
mode and place your data-logger on a

HI9200

 Infrared Transmitter (ensuring that

the two infrared LEDs are placed on top of

each other). The memory can be downloaded

to your PC through the 

HI9200

's RS232

port.
During the data transfer the instrument dis-
plays the message "r 232".

Using the 

HI 9200

 Infrared Transmitter, all recorded data can be fed

to your Personal Computer for easy reproduction, storage or elabora-

tion without the interference of cables or cords between the meter and

the transmitter.
Data transmission from the instrument to the PC is now much easier

with the new 

HI92000 

Windows

®

 compatible application software

offered by Hanna Instruments.
User friendly, 

HI92000 

offers a variety of features and has an on line

help feature to support you throughout all situations.

HI92000

 allows you to use the powerful means of the most diffused

spread sheet programs (e.g. Excel

©

, Lotus 1-2-3

©

). Simply run your

favorite spread sheet and open the file downloaded by 

HI92000

. It

is then possible to make any elaboration available with your software
(e.g. graphics, statistic analysis).
To install 

HI92000 

you need a 3.5" drive and few minutes to follow

the instructions conveniently printed on the disk's label.

Windows

®

 is registered Trademark of "Microsoft Co."

Excel

©

 Copyright of "Microsoft Co."

Lotus 1-2-3

©

 Copyright of "Lotus Co."

Summary of Contents for HI 92804



















Reviews: