background image

47

46

HI 84430

 is warranteed for two years against defects in workmanship and materials when used for its

intended purpose and maintained according to the instructions.
This warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed maintenance is not covered.
If service is required, contact your dealer. If under warranty, report the model number, date of purchase,

serial number and the nature of the failure. If the repair is not covered by the warranty, you will be
notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization
Number from the Customer Service Department and then send it with shipment costs prepaid. When
shipping any instrument, make sure it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of
purchase.

WARRANTY

Hanna Instruments reserves the right to modify the design, construction and appearance of its products

without advance notice.

Before using this product, make sure that it is entirely suitable for your specific application and for the
environment in which it is used.
Operation of this instrument may cause unacceptable interferences to other electronic equipments, this

requiring the operator to take all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade the instrument EMC
performance.
To avoid damages or burns, do not put the instrument in microwave ovens. For yours and the instrument
safety do not use or store the instrument in hazardous environments.

RECOMMENDATION FOR USERS

REAGENTS

HI 84430-50

Titrant solution for low range (100mL)

HI 84430-51

Titrant solution for high range (100mL)

HI 84430-55M

Pump calibration solution (230mL)

HI 84430-58

Additional reagent (30mL)

HI 84430-70

Reagents kit for low and high range (about 150 titrations)

HI 84430-71

Reagents kit for low range (about 150 titrations)

HI 84430-72

Reagents kit for high range (about 150 titrations)

pH CALIBRATION SOLUTIONS

HI 7001M

Buffer solution pH 1.68 (230mL)

HI 7004M

Buffer solution pH 4.01  (230mL)

HI 7008M

Buffer solution pH 8.30 (230mL)

HI 7001M-6

Buffer solution pH 1.68 (6 x 230mL)

HI 7004M-6

Buffer solution pH 4.01  (6 x 230mL)

HI 70083M-6

Buffer solution pH 8.30 (6 x 230mL)

ELECTRODES

HI 1131B

pH Electrode

HI 7662-M

Temperature probe

ELECTRODE FILL SOLUTION

HI 7071

Filling solution 

for HI 1131B

 (30 mL)

ELECTRODE STORAGE SOLUTION

HI 70300M

Storage Solution, 230 mL bottle

CLEANING SOLUTION

HI 7061M

Electrode Cleaning Solution, 230 mL bottle

OTHER ACCESSORIES

HI 70483M

Tube set with cap and tip for titrant bottle

HI 731319

Stir bar 25 x 7 mm (10 pcs)

HI 731342

2000

μ

L fixed volume pipette

HI 731352

Tip for 2000

μ

L fixed pipette (4pcs)

HI 731341

1000

μ

L fixed volume pipette

HI 731351

Tip for 1000

μ

L fixed pipette (25pcs)

ACCESSORIES

Summary of Contents for HI 84430


























Reviews: