manualshive.com logo in svg

Hanna Instruments HI 84181, Instruction Manual, Page: 3 / 20

Share
Download
Hanna Instruments HI 84181 Instruction Manual Download Page 3

3

PRELIMINARY EXAMINATION

Please examine this product carefully. Make sure that the instrument is not damaged. If any
damage occured during shipment, please notify your Dealer.
Each 

HI 84181 

instrument is supplied complete with:

• Reagents set for 20 tests
• One 2000 µL automatic pipette
• Six plastic tips for the 2000 µL automatic pipette
• Two 50 mL beakers
• 

HI 61014

 Potassium half cell

• 

HI 5315

 Reference half cell

• 

HI 7662-T 

Temperature probe

• Stir bar (2 pcs)
• Power cable
• 

HI 7076

 Refilling solution (4×30 mL)

• One 1 mL syringe
• One 1 mL pipette
• Instruction sheet
• Instruction manual

Note:

Save all packing material until you are sure that the instrument works correctly.
Any defective item must be returned in its original packing.

GENERAL DESCRIPTION

The 

HI 84181

 is a low cost, easy to use, potassium ISE instrument that performs automatic analysis

with all the necessary calculations assuring to the user a simple and effective interface.
The instrument comes with a powerful and effective built-in algorithm to analyze the shape of the ISE
electrode response and to determine the reaction completion.
By simply pressing the 

Start

 key, the instrument performs automatic analysis, all the necessary

calculations and verifications. The result is immediately displayed in convenient units, then the
instrument is ready for another measurement.

Summary of Contents for HI 84181





















Reviews:

No comments