Hanna Instruments HI 8410 Instruction Manual Download Page 19

19

All HANNA instruments

®

 

meters are warranted for two years 

against

defects in workmanship and materials when used for their intended
purpose and maintained according to instructions.

The probes are warranted for a period of one year

.

This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of purchase,
serial number and the nature of the failure. If the repair is not covered by
the warranty, you will be notified of the charges incurred.
If the instrument is to be returned to HANNA instruments

®

, first obtain a

Returned Goods Authorization Number from the Customer Service depart-
ment and then send it with shipment costs prepaid.
When shipping any instrument, make sure it is properly packaged for
complete protection.

All rights are reserved. Reproduction in whole or in part is prohibited

without the written consent of the copyright owner.

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the
environment in which they are used.
Operation of these instruments in residential area could cause unacceptable
interferences to radio and TV equipments, requiring the operator to take all
necessary steps to correct interferences.
The trimmers are sensitive to electrostatic discharges. It is recommended to use
anti-static screwdrivers.
Unplug the instrument from the power supply before replacing the fuse. External
cables to be connected to the rear panel should end with cable lugs.
To maintain the EMC performance of this equipment, use the proper cables.
Any variation introduced by the user to the supplied equipment may degrade the
instruments' EMC performance.
To avoid electrical shock, do not use these instruments when voltages at the
measurement surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave ovens.

WARRANTY

WARRANTY

WARRANTY

WARRANTY

WARRANTY

Summary of Contents for HI 8410





















Reviews: