49
LOGGING MODE 3
This logging mode can be used for any sample measurements. By
choosing this logging mode,
will be available in
Measure
mode.
To log data using this mode:
• Press
while in
Measure mode to manually log a
record. The “Logged” indicator will be displayed on the LCD.
• The records will be stored in one lot. In order to change the
logging lot, see the measured parameter setup for details, Log
option, New Lot generation.
LOGGING MODE 4
This logging mode can be used for multiple samples measurement. By choosing this logging mode,
and
will be available in
Measure mode.
To log data using this mode:
• Press
while in
Measure mode to manually log a record. Each value is logged at the time when the key
was pressed. When the measured value is frozen on the LCD by pressing
and the stability criterion is
reached, the logged value is the one that has been frozen on the LCD.
• To store another frozen value, press
to return to normal logging mode and then
again.
• The records will be stored in one lot. In order to change the logging lot, see the measured unit
Setup for
details, Log option, New Lot generation.
LOGGING MODE 5
This logging mode can be used for multiple samples measurement. By choosing this logging mode,
and
will be available in
Measure mode.
Note
: If the Reading Mode option is set as Direct and the Logging Mode 5 session is started, a warning pop-
up will be displayed on the LCD, informing the user that the Reading Mode option must be set as Direct/
AutoHold in order to use this logging mode.
To log data using this mode:
• Press
while in
Measure mode to start the logging session. The logged values are only the ones
frozen on the LCD, after
was pressed and the stability criterion reached.
• To store another frozen value, press
to return to normal logging mode and then
again.
