manualshive.com logo in svg

Hanna Instruments edge EC HI2003, Manual, Page: 16 / 39

Share
Download
Hanna Instruments edge EC HI2003 Manual Download Page 16

Setup/Installation

16

Delete Logging Type/Lot

Press 

RCL

 and select the parameter log.

Use  the 

pq

  keys  to  select  the  Manual/Stability 

records  or  Interval  lots  to  delete.  Press 

CLR

.  The 

instrument  will  display  “CLEAR  MANUAL”  for  Manual 
Records, “CLEAR STAB” for Stability Records. 

For Interval lots, the message “CLEAR”, followed by the 
selected lot will be displayed with “CFM” tag blinking.
Press the 

pq

 keys to select a diff erent lot. Press 

CFM

. 

The instrument will display “PLEASE WAIT”.

“CLEAR DONE” is displayed for a few seconds after the 
selected Interval lot is deleted.

Delete Records (Manual and Stability log on demand)

To  delete  individual  records  (Manual  and  Stability  logs  only),  enter  Manual 
(Stability)  log  by  pressing 

CFM

  when  Manual  (Stability)  is  displayed.  Use  the 

ARROW keys to select the record to be deleted and then press 

CLR

.

The  instrument  will  display  “CLEAR  REC.“  and  record 
number along with “CFM” tag blinking. Use the ARROW 
keys to select another record if necessary.

Press 

CFM

.  The  instrument  will  display  “PLEASE  WAIT”  and  then  “CLEAR 

DONE”  message.  When  individual  logs  are  deleted  within  saved  MANUAL  or 
STABILITY logs, the logs will renumber, fi lling in the deleted data but staying in 
chronological order.
To delete all records of the MANUAL (STABILITY) log, proceed as described on 
page 16 for LOTS.

Select  the  Manual  (Stability)  lot  and  press 

CLR

. 

The  ”CLEAR”  message  will  be  displayed  along  with 
”MANUAL”  or  “STABILITY”  and 

CFM

  tag  blinking  on 

the LCD. Press the 

CFM

 key to confi rm the deleting of 

the selected lot (MANUAL or STABILITY) or all records. 
Press 

CLR

 to exit without deleting. 

Viewing 

Logged 

Data

Summary of Contents for edge EC HI2003








































Reviews:

No comments